Toggle Side Panel
Tech Explorations
Back to Course

KiCad Like a Pro 3e – eBook

0% Complete
0/0 Steps
  1. eBook status
    1 Lecture
  2. 00 - Front matter
    5 Lectures
  3. 01 - Getting started with PCB design
    6 Lectures
  4. 02 – Getting started with KiCad
    12 Lectures
  5. 03 - Project: A hands-on tour of KiCad - Schematic Design
    11 Lectures
  6. 04 - Project: A hands-on tour of KiCad - Layout
    10 Lectures
  7. 05 - Design principles and PCB terms
    16 Lectures
  8. 06 - PCB design workflows
    17 Lectures
  9. 07 - Fundamental Kicad how-to: Symbols and Eeschema
    17 Lectures
  10. 08 - Fundamental Kicad how-to: Footprints and Pcbnew
    31 Lectures
  11. 09 - Project: Design a simple breadboard power supply PCB
    23 Lectures
  12. 10 - Project: A 4 x 8 x 8 LED matrix array clock
    25 Lectures
  13. 11 - Project: MCU datalogger with build-in 512K EEPROM and clock
    37 Lectures
  14. 12 - Project: An ESP32 clone
    25 Lectures
  15. 13 - Recipes
    56 Lectures
  16. 14 - What's new in KiCad 7
    14 Lectures
  17. XX – Content by contributing authors
    4 Lectures
Section Progress
0% Complete

Please note that:

  • Work does not follow a linear pattern. In general, we’ll publish recipes, fundamentals, projects, and finish with the introductory sections.
  • We may add or remove chapters without notice.
  • To provide feedback, please use the discussion tool at the bottom of every chapter page.
  • We have an errata page which can also be used for reporting a bug, but is better suitable for once this project is formally published.

Status indicators

  • WIP: Work in Progress
  • COM: Chapter is complete and published
  • EDT: Chapter is being edited
  • Last Update date format: DD/MM/YY

Book status per section and chapter

Chapter Section Status Updated
KiCad 7 updates Incorporating new and updated content for KiCad. WIP 28/10/2021
An introduction: Why KiCad? Front matter COM 28/10/2021
What is a PCB? Introduction COM 03/11/2021
The PCB design process Introduction COM 03/11/2021
Fabrication Introduction COM 03/11/2021
Get KiCad for your operating system Introduction COM 04/11/2021
Example projects Introduction COM 03/11/2021
Introduction Getting started with KiCad 6 COM 03/11/2021
KiCad Project Manager (main window) Getting started with KiCad 6 COM 03/11/2021
Overview of the individual KiCad apps Getting started with KiCad 6 COM 05/11/2021
Paths and Libraries Getting started with KiCad 6 COM 08/11/2021
Create a new project from scratch Getting started with KiCad 6 COM 08/11/2021
Create a new project from a template Getting started with KiCad 6 COM 08/11/2021
Kicad 6 on Mac OS, Linux, Windows Getting started with KiCad 6 COM 08/11/2021
Differences between KiCad 6 and 5 Getting started with KiCad 6 COM 08/11/2021
Introduction to schematic design and objective of this section Project: A hands-on tour of KiCad – Schematic Design COM 23/09/2021
Quick intro to the design workflows Project: A hands-on tour of KiCad – Schematic Design COM 23/09/2021
The finished KiCad project and directory Project: A hands-on tour of KiCad – Schematic Design COM 23/09/2021
Start Kicad and create a new project Project: A hands-on tour of KiCad – Schematic Design COM 23/09/2021
1 – Start Eeschema, setup Sheet Project: A hands-on tour of KiCad – Schematic Design COM 23/09/2021
2 – Add symbols Project: A hands-on tour of KiCad – Schematic Design COM 23/09/2021
3 – Arrange, annotate, associate Project: A hands-on tour of KiCad – Schematic Design COM 23/09/2021
4 – Wiring Project: A hands-on tour of KiCad – Schematic Design COM 23/09/2021
5 – Nets Project: A hands-on tour of KiCad – Schematic Design COM 23/09/2021
6 – The Electrical Rules Check Project: A hands-on tour of KiCad – Schematic Design COM 23/09/2021
7 – Comments with text and graphics Project: A hands-on tour of KiCad – Schematic Design COM 23/09/2021
Introduction to layout design and objective of this section Project: A hands-on tour of KiCad – Layout COM 29/09/2021
1 – Start Pcbnew, import footprints Project: A hands-on tour of KiCad – Layout COM 29/09/2021
2 – Outline and constraints (edge cut) Project: A hands-on tour of KiCad – Layout COM 29/09/2021
3 – Move footprints in place Project: A hands-on tour of KiCad – Layout COM 29/09/2021
4 – Route (add tracks) Project: A hands-on tour of KiCad – Layout COM 29/09/2021
5 – Refine the outline Project: A hands-on tour of KiCad – Layout COM 29/09/2021
6 – Silkscreen (text and graphics) Project: A hands-on tour of KiCad – Layout COM 29/09/2021
7 – Design rules check Project: A hands-on tour of KiCad – Layout COM 29/09/2021
8 – Export Gerbers and order Project: A hands-on tour of KiCad – Layout COM 29/09/2021
The manufactured PCB Project: A hands-on tour of KiCad – Layout COM 29/09/2021
Design principles and basic concepts – Introduction Design principles and PCB terms COM 15/09/21
Schematic symbols Design principles and PCB terms COM 15/09/21
FR4 Design principles and PCB terms COM 15/09/21
Traces Design principles and PCB terms COM 15/09/21
Keep-out areas Design principles and PCB terms COM 15/09/21
Pads and holes Design principles and PCB terms COM 15/09/21
Via Design principles and PCB terms COM 15/09/21
Annular ring Design principles and PCB terms COM 15/09/21
Solder mask Design principles and PCB terms COM 15/09/21
Silkscreen Design principles and PCB terms COM 15/09/21
Drill bit and drill hit Design principles and PCB terms COM 15/09/21
Surface mounted devices Design principles and PCB terms COM 15/09/21
Gold Fingers Design principles and PCB terms COM 15/09/21
Panel Design principles and PCB terms COM 15/09/21
Solder paste and paste stencil Design principles and PCB terms COM 15/09/21
Pick-and-place Design principles and PCB terms COM 15/09/21
Introduction to the Schematic Design Workflow Design workflow and considerations COM 16/09/21
Schematic Design Step 1: Setup Design workflow and considerations COM 16/09/21
Schematic Design Step 2: Symbols Design workflow and considerations COM 16/09/21
Schematic Design Step 3: AAA (Arrange, Annotate, Associate) Design workflow and considerations COM 16/09/21
Schematic Design Step 4: Wire Design workflow and considerations COM 16/09/21
Schematic Design Step 5: Nets Design workflow and considerations COM 16/09/21
Schematic Design Step 6: Electrical Rules Check Design workflow and considerations COM 16/09/21
Schematic Design Step 7: Comments and Graphics Design workflow and considerations COM 16/09/21
Introduction to the PCB Layout Workflow Design workflow and considerations COM 16/09/21
Layout Design Step 1: Setup Design workflow and considerations COM 16/09/21
Layout Design Step 2: Outline and constraints Design workflow and considerations COM 16/09/21
Layout Design Step 3: Place footprints Design workflow and considerations COM 16/09/21
Layout Design Step 4: Route Design workflow and considerations COM 16/09/21
Layout Design Step 5: Silkscreen Design workflow and considerations COM 16/09/21
Layout Design Step 6: Design rules check Design workflow and considerations COM 16/09/21
Layout Design Step 7: Export & Manufacture Design workflow and considerations COM 16/09/21
About this section Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
Left menu bar overview Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
Top menu bar overview Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
Right menu bar overview Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
Schematic editor preferences Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
How to find a symbol with the Chooser Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
How to find schematic symbols on the Internet Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
How to install symbol libraries in bulk Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
How to create a custom symbol Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
How to associate a symbol with a footprint Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
Net labels Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
Net classes Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
Hierarchical sheets Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
Global labels Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
Hierarchical labels and import sheet pin Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
Electrical rules and customization Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
Bulk editing of schematic elements Fundamental Kicad how-to: Symbols and Eeschema COM 08/10/21
About this section Fundamental Kicad how-to: Footprints and Pcbnew COM 16/10/21
Left menu bar overview Fundamental Kicad how-to: Footprints and Pcbnew COM 16/10/21
Top menu bar overview Part 1 Fundamental Kicad how-to: Footprints and Pcbnew COM 16/10/21
Top menu bar overview Part 2 Fundamental Kicad how-to: Footprints and Pcbnew COM 16/10/21
Right menu bar overview Fundamental Kicad how-to: Footprints and Pcbnew COM 16/10/21
Right menu bar overview – Appearance Fundamental Kicad how-to: Footprints and Pcbnew COM 16/10/21
Layout editor preferences (Preferences window, PCB Editor) Fundamental Kicad how-to: Footprints and Pcbnew COM 16/10/21
Board Setup – Board Stackup Fundamental Kicad how-to: Footprints and Pcbnew COM 16/10/21
Board Setup – Text & Graphics Fundamental Kicad how-to: Footprints and Pcbnew COM 16/10/21
Board Setup – Design Rules – Constraints, sizes, classes Fundamental Kicad how-to: Footprints and Pcbnew COM 16/10/21
Board Setup – Design Rules – Custom Rules and violation severity Fundamental Kicad how-to: Footprints and Pcbnew COM 16/10/21
How to find and use a footprint Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Footprint sources on the Internet Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
How to install footprint libraries Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Filled zones Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Keep-out zones Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Interactive router Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Length measuring tools Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Bulk editing Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Create a custom footprint, introduction Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Create a custom footprint, 1, Fabrication layer Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Create a custom footprint, 2, Pads Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Create a custom footprint, 3, Courtyard layer Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Create a custom footprint, 4, Silkscreen layer Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Finding and using a 3D shape for a footprint Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
How to export and test Gerber files Fundamental Kicad how-to: Footprints and Pcbnew COM 17/10/21
Project – Introduction Project: Design a simple breadboard power supply PCB COM 20/10/21
Schema 1 – Setup Project: Design a simple breadboard power supply PCB COM 20/10/21
Schema 2 – Symbols Project: Design a simple breadboard power supply PCB COM 20/10/21
Edit Component values Project: Design a simple breadboard power supply PCB COM 20/10/21
Schema 3 – Arrange, Annotate Project: Design a simple breadboard power supply PCB COM 20/10/21
Schema 3 – Associate Project: Design a simple breadboard power supply PCB COM 20/10/21
Schema 4 – Wiring Project: Design a simple breadboard power supply PCB COM 20/10/21
Schema 5 & 6 – Nets and Electrical Rules Check Project: Design a simple breadboard power supply PCB COM 20/10/21
Schema 7 – Comments Project: Design a simple breadboard power supply PCB COM 20/10/21
Introduction to layout editing Project: Design a simple breadboard power supply PCB COM 20/10/21
Layout 1 – Setup Project: Design a simple breadboard power supply PCB COM 20/10/21
Layout 2 – Outline and constraints Project: Design a simple breadboard power supply PCB COM 20/10/21
Layout 3 – Place components Project: Design a simple breadboard power supply PCB COM 20/10/21
Layout 2 supplemental – Refine outline Project: Design a simple breadboard power supply PCB COM 20/10/21
Layout 4 – Route Project: Design a simple breadboard power supply PCB COM 20/10/21
Layout 5 – Copper fills Project: Design a simple breadboard power supply PCB COM 20/10/21
Layout 6 – Silkscreen Project: Design a simple breadboard power supply PCB COM 20/10/21
Layout 7 – Design Rules Check Project: Design a simple breadboard power supply PCB COM 20/10/21
Layout 8 – Export and Manufacture Project: Design a simple breadboard power supply PCB COM 20/10/21
Project – Introduction Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Schema 1 – Setup Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Schema 2 – Symbols Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Schema 3 – Arrange, Annotate Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Schema 3 – Associate Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Schema 4 – Wiring Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Schema 5 – Nets Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Schema 6 – Electrical Rules Check Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Schema 7 – Comments Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Schema – Last-minute edits Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Layout 1 – Setup Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Layout 2 – Outline and constraints Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Layout 3 – Place components Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Layout 2 supplemental – Refine outline Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Layout 3 supplemental – Move footprints to back layer Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Layout 4 – Route Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Layout 4 – Copper fills Project: A 4 x 8 x 8 LED matrix array clock COM 27/10/21
Layout 5 – Silkscreen Project: A 4 x 8 x 8 LED matrix array clock COM 28/10/21
Layout 6 – Design Rules Check Project: A 4 x 8 x 8 LED matrix array clock COM 28/10/21
Layout 7 – Manufacture Project: A 4 x 8 x 8 LED matrix array clock COM 28/10/21
Bonus – 3D shapes Project: A 4 x 8 x 8 LED matrix array clock COM 28/10/21
Bonus – Found a bug in the schematic! (and fix) Project: A 4 x 8 x 8 LED matrix array clock COM 28/10/21
The assembled and working PCB Project: A 4 x 8 x 8 LED matrix array clock COM 28/10/21
Project – Introduction Project: MCU datalogger with build-in 512K EEPROM and clock COM 12/11/21
Create the new project and create new Git repository Project: MCU datalogger with build-in 512K EEPROM and clock COM 12/11/21
Schema 1 – Setup Project: MCU datalogger with build-in 512K EEPROM and clock COM 12/11/21
Schema 2 – Symbols Project: MCU datalogger with build-in 512K EEPROM and clock COM 12/11/21
Schema 2 – Sheet 2 Project: MCU datalogger with build-in 512K EEPROM and clock COM 12/11/21
Schema 3 – Arrange, Annotate Project: MCU datalogger with build-in 512K EEPROM and clock COM 12/11/21
Edit Component values Project: MCU datalogger with build-in 512K EEPROM and clock COM 12/11/21
Schema 3 – Associate Project: MCU datalogger with build-in 512K EEPROM and clock COM 12/11/21
Schema 4 – Wiring of sheet 1 Project: MCU datalogger with build-in 512K EEPROM and clock COM 12/11/21
Schema 4 – Wiring of sheet 2 Project: MCU datalogger with build-in 512K EEPROM and clock COM 12/11/21
Schema 5 – Nets Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Schema 6 – Electrical Rules Check Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Schema 7 – Comments Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Git, setup in a 2-layer PCB branch Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Layout 1 – Setup Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Layout 2 – Outline and constraints Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Layout 3 – Place components Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Layout 2 – Outline refinement Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Layout 4 – Route Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Layout 4 – Copper fills Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Layout 4 – Routing improvements Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Layout 5 – Silkscreen Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Layout 4 – Fix new routing violations Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Layout 6 – Design Rules Check Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
Layout 7 – Manufacture Project: MCU datalogger with build-in 512K EEPROM and clock COM 13/11/21
3D shapes Project: MCU datalogger with build-in 512K EEPROM and clock COM 09/11/21
Merge 2-layer branch to main Project: MCU datalogger with build-in 512K EEPROM and clock COM 09/11/21
Alternative routing: 4 Layer PCB in new Git branch Project: MCU datalogger with build-in 512K EEPROM and clock COM 09/11/21
Four-layer PCB routing Project: MCU datalogger with build-in 512K EEPROM and clock COM 09/11/21
Four-layer PCB manufacturing Project: MCU datalogger with build-in 512K EEPROM and clock COM 09/11/21
Updating layout from changes to the schematic with Git Project: MCU datalogger with build-in 512K EEPROM and clock COM 09/11/21
Project – Introduction Project: An ESP32 clone COM 07/01/22
Schema 1 – New KiCad project and Schematic Setup Project: An ESP32 clone COM 07/01/22
Schema 2 – Symbols Project: An ESP32 clone COM 07/01/22
Schema 3 – Annotate and set component values Project: An ESP32 clone COM 07/01/22
Schema 3 – Arrange Project: An ESP32 clone COM 07/01/22
Schema 3 – Associate Project: An ESP32 clone COM 07/01/22
Schema 4 – Wiring Project: An ESP32 clone COM 07/01/22
Schema 5 – Nets and Net Classes Project: An ESP32 clone COM 07/01/22
Schema 6 – Electrical Rules Check Project: An ESP32 clone COM 07/01/22
Schema 7 – Comments Project: An ESP32 clone COM 07/01/22
Layout – Introduction Project: An ESP32 clone COM 07/01/22
Layout 1 – Setup Project: An ESP32 clone COM 07/01/22
Layout 2 – Outline and constraints Project: An ESP32 clone COM 07/01/22
Layout 3 – Place components Project: An ESP32 clone COM 07/01/22
Layout 2 supplemental – refine outline Project: An ESP32 clone COM 07/01/22
Layout 4 – Route Project: An ESP32 clone COM 07/01/22
Layout 4 – Copper fills and keep out areas Project: An ESP32 clone COM 07/01/22
Layout 5 – Silkscreen Project: An ESP32 clone COM 07/01/22
Layout 4 – Routing improvements Project: An ESP32 clone COM 07/01/22
Layout 6 – Design Rules Check Project: An ESP32 clone COM 07/01/22
Layout 7 – Manufacture Project: An ESP32 clone COM 07/01/22
3D shapes Project: An ESP32 clone COM 07/01/22
Finding and correcting a design defect Project: An ESP32 clone COM 07/01/22
Fix the schematic Project: An ESP32 clone COM 07/01/22
Fix the layout Project: An ESP32 clone COM 07/01/22
How to create a custom silkscreen or copper graphic Recipes COM 23/08/21
Change a symbol in bulk Recipes COM 24/08/21
Interactive delete Recipes COM 24/08/21
Find and Replace (Eeschema) Recipes COM 24/08/21
Edit Text & Graphics Properties Recipes COM 24/08/21
Edit Track & Via Properties (Pcbnew) Recipes COM 25/08/21
Text variables Recipes COM 25/08/21
Board Setup – pre-defined sizes for tracks and vias Recipes COM 26/08/21
Board Setup – Design rules violation severity Recipes COM 26/08/21
Board Setup – Custom design rules Recipes COM 26/08/21
Schematic Setup – Electrical Rules and violation severity Recipes COM 27/08/21
Schematic Setup – Electrical Rules and Pin conflicts map Recipes COM 27/08/21
Field name templates Recipes COM 27/08/21
Bill of Materials method 1: Pcbnew Recipes COM 30/08/21
Bill of Materials method 2: Eeschema Recipes COM 30/08/21
Bill of Materials method 3: Interactive HTML BOM plugin Recipes COM 30/08/21
Import components from Snapeda Recipes COM 31/08/21
The Freerouting autorouter introduction Recipes COM 02/09/21
Install and start FreeRouting on MacOS Recipes COM 02/09/21
Install and start FreeRouting on Linux Kubuntu Recipes COM 02/09/21
Install and start FreeRouting on Windows Recipes COM 02/09/21
How to use the Freerouting autorouter 2-layer example Recipes COM 02/09/21
How to use the Freerouting autorouter 4-layer example Recipes COM 02/09/21
Pcbnew Inspection menu Recipes COM 02/09/21
Single track and differential pair routing Recipes COM 06/09/21
Track length tuning Recipes COM 06/09/21
Differential pair skew tuning Recipes COM 06/09/21
Interactive router modes Recipes COM 07/09/21
The footprint wizard Recipes COM 07/09/21
Net and wire highlighter tool Recipes COM 07/09/21
Pcbnew Origins Recipes COM 07/09/21
KiCad project management with Git Recipes COM 08/09/21
Install Git Recipes COM 08/09/21
Git configuration Recipes COM 08/09/21
Create a new KiCad project Git repository Recipes COM 08/09/21
Exclude files from the repository with Gitignore Recipes COM 08/09/21
Basic Git commands: add, commit, log, diff Recipes COM 08/09/21
Basic Git commands: branch Recipes COM 08/09/21
Basic Git commands: merge Recipes COM 08/09/21
Sharing your KiCad project on GitHub Recipes COM 09/09/21
How to customize the editor color scheme Recipes COM 09/09/21
How to import an EAGLE, Altium, or Cadstar project Recipes COM 09/09/21
The circuit simulator Recipes COM 10/09/21
Prepare the circuit for simulation Recipes COM 10/09/21
Configure the simulator Recipes COM 10/09/21
Simulate Recipes COM 10/09/21
How to import a KiCad 5 project Recipes COM 13/09/21
How to create a KiCad project template Recipes COM 13/09/21
Use a system project template Recipes COM 13/09/21
Create a user project template Recipes COM 13/09/21
Archive/un-archive and share a project Recipes COM 13/09/21
How to use buses Recipes COM 28/10/21
Calculate the width of a trace Recipes COM 05/11/21
Design a custom schematic sheet Recipes COM 05/11/21
What is the meaning of the layers in Pcbnew and in the footprint editor? (by Rene Pöschl) Content by contributing authors WIP
Power pins in multi unit symbols (Marc Nijdam) Content by contributing authors WIP
KLC RULE F5.3 Content by contributing authors WIP
Reference designators for electrical and electronics parts and equipment Content by contributing authors WIP